I am trying to find a good headset mic for triggering the vocoder on the Montage at Live gigs, without spending too much. Everything I've read so far indicates that Mics generally have a low signal, can have the potential of noise at live gigs coming through the mic, and triggering the vocoder isn't easy unless you have the proper setup, such as:
- Dynamic mic (not condenser)
- Good quality mic that reduces noise in the room
- Need an XLR (TRS) to 1/4" (TS) mono cable
The following seem to fit the bill, but does anyone know if either of these would be a good choice &/or are all the qualities/specs I listed above accurate?
*Shure WH20XLR Dynamic Headset Microphone - (Wired) Includes 3-pin Male XLR Connector
http://www.shure.com/americas/products/ ... icrophones
*Audio-Technica PRO 8HEx Hypercardioid Dynamic Headworn Microphone, XLR Connector
https://www.audio-technica.com/cms/wire ... index.html
Also, I read somewhere that using a Transformer, such as the 'Shure A85F Transformer', will give the mic a boost in gain more than just a standard XLR to 1/4" TS mono cable...does anyone know if there is some truth to this?
On Shure's site it says:
*Shure A85F Line Matching Transformer: The Shure A85F is a low-to-high impedance microphone-matching transformer that provides 24 dB of signal increase gain.
http://www.shure.com/americas/products/ ... ransformer
Would this make a difference for plugging a Dynamic mic into the Montage for vocoder triggering, compared to using a standard XLR to 1/4" TS mono cable?
Welcome to the new era from the company that brought you the DX and the Motif. Montage sets the next milestone with sophisticated dynamic control, massive sound creation and streamlined workflow.