DX7 Schematics

Downloads for the Yamaha DX7 and TX7 module

Moderators: Derek, parametric, Saul

User avatar
AndyHornBlower
Member
Member
Posts: 201
Joined: Sat Jun 24, 2017 7:06 am

DX7 Schematics

Unread post by AndyHornBlower »

Schematics for the Yamaha DX7, presumably Mark 1. I've indexed a few points on the diagram, but the bookmarks might work slightly differently in other PDF readers. I used Foxit Reader 3.1.something (an old version).
DX7_SCHEMATICS_text.pdf
(956.23 KiB) Downloaded 642 times

Foxit Reader 3.1.something can be downloaded from here:

download/file.php?id=3474

It may offer to install some crapware - just say no. Apart from that it, it's fine, and I've used it for years.

See also:

DX7 & DX9 Service Manual
viewtopic.php?f=154&t=11196


Slow the spread of #covid19 Coronavirus : #Masks4All #masks4all

User avatar
Miks
Specialist Moderator
Specialist Moderator
Posts: 2196
Joined: Fri Oct 31, 2008 1:00 am
Location.: Germany

Re: DX7 Schematics

Unread post by Miks »

I've spent countless hours over several weeks and 'reworked' the DX7 Mk.I schematic - hope someone likes it & finds it helpful as well... :D
DX7 Schematic - Large.pdf
(8.7 MiB) Downloaded 77 times
My (key related) gear (in alphabetical order):
Ferrofish: B4000+
Kawai: K1 II
Korg: M1 (up'd to EX, w/ 'Cool Blue'), M1REX (w/ 'Cool Blue'), Poly-800
Roland: D-50, D-110, D-550, PG-1000
Yamaha: AW1600, DX7IID (w/ 'Cool Blue'), EX5R, RM50, RX5, SY99 (w/ 'Cool Blue'), TG500,
TX-802, YMM2
Sector101: SYEMB05 (5x), SYEMB06 (3x), EXFLM2 (1kit), MCD Sweet16 (1x), DataBlade32 (1x),
WaveBlade 8MB Card (1x) & 1x Programmer Unit for WaveBlade

User avatar
javelin276
Member
Member
Posts: 177
Joined: Wed Oct 12, 2016 6:00 pm
Location.: USA
Contact:

Re: DX7 Schematics

Unread post by javelin276 »

Thanks Guys! I needed info on the Breath Controller circuit, and there it is!

User avatar
AndyHornBlower
Member
Member
Posts: 201
Joined: Sat Jun 24, 2017 7:06 am

Re: DX7 Schematics

Unread post by AndyHornBlower »

Miks wrote:
Wed May 27, 2020 1:00 pm
I've spent countless hours over several weeks and 'reworked' the DX7 Mk.I schematic - hope someone likes it & finds it helpful as well... :D
DX7 Schematic - Large.pdf
I'm asked for a password when I try to open it. Should I be?

:confusion-confused:
Slow the spread of #covid19 Coronavirus : #Masks4All #masks4all

User avatar
Miks
Specialist Moderator
Specialist Moderator
Posts: 2196
Joined: Fri Oct 31, 2008 1:00 am
Location.: Germany

Re: DX7 Schematics

Unread post by Miks »

AndyHornBlower wrote:
Wed May 27, 2020 4:40 pm
Miks wrote:
Wed May 27, 2020 1:00 pm
I've spent countless hours over several weeks and 'reworked' the DX7 Mk.I schematic - hope someone likes it & finds it helpful as well... :D
DX7 Schematic - Large.pdf
I'm asked for a password when I try to open it. Should I be?

:confusion-confused:
Really :?: :?: :?: I've set NO passwort - you should be able to open it after the download just by a double-click...
My (key related) gear (in alphabetical order):
Ferrofish: B4000+
Kawai: K1 II
Korg: M1 (up'd to EX, w/ 'Cool Blue'), M1REX (w/ 'Cool Blue'), Poly-800
Roland: D-50, D-110, D-550, PG-1000
Yamaha: AW1600, DX7IID (w/ 'Cool Blue'), EX5R, RM50, RX5, SY99 (w/ 'Cool Blue'), TG500,
TX-802, YMM2
Sector101: SYEMB05 (5x), SYEMB06 (3x), EXFLM2 (1kit), MCD Sweet16 (1x), DataBlade32 (1x),
WaveBlade 8MB Card (1x) & 1x Programmer Unit for WaveBlade

User avatar
AndyHornBlower
Member
Member
Posts: 201
Joined: Sat Jun 24, 2017 7:06 am

Re: DX7 Schematics

Unread post by AndyHornBlower »

Yes, really.

I'm still using Foxit Reader 3.x, so maybe it's not compatible, but that almost never happens. Being asked for a password when there isn't one set, is not something I'm used to.

I get this prompt:

pw.gif
pw.gif (14.54 KiB) Viewed 840 times

Entering a blank password didn't work.
Slow the spread of #covid19 Coronavirus : #Masks4All #masks4all

User avatar
Miks
Specialist Moderator
Specialist Moderator
Posts: 2196
Joined: Fri Oct 31, 2008 1:00 am
Location.: Germany

Re: DX7 Schematics

Unread post by Miks »

That's odd! I've downloaded the file I've uploaded just to see if and what's wrong - absolutely no problem, no password required...

javelin276, how about you? Have you been asked to enter a password when trying to open the pdf file?
My (key related) gear (in alphabetical order):
Ferrofish: B4000+
Kawai: K1 II
Korg: M1 (up'd to EX, w/ 'Cool Blue'), M1REX (w/ 'Cool Blue'), Poly-800
Roland: D-50, D-110, D-550, PG-1000
Yamaha: AW1600, DX7IID (w/ 'Cool Blue'), EX5R, RM50, RX5, SY99 (w/ 'Cool Blue'), TG500,
TX-802, YMM2
Sector101: SYEMB05 (5x), SYEMB06 (3x), EXFLM2 (1kit), MCD Sweet16 (1x), DataBlade32 (1x),
WaveBlade 8MB Card (1x) & 1x Programmer Unit for WaveBlade

User avatar
javelin276
Member
Member
Posts: 177
Joined: Wed Oct 12, 2016 6:00 pm
Location.: USA
Contact:

Re: DX7 Schematics

Unread post by javelin276 »

Nope, no password required. It opened right up!

User avatar
AndyHornBlower
Member
Member
Posts: 201
Joined: Sat Jun 24, 2017 7:06 am

Re: DX7 Schematics

Unread post by AndyHornBlower »

Fair enough. I expect it's all part of Adobe's :twisted: plan to make everyone use their reader, even though it's meant to be an open standard.

I'm reluctant to install that again, but I'll have another look for alternatives, soon.
Slow the spread of #covid19 Coronavirus : #Masks4All #masks4all

User avatar
Miks
Specialist Moderator
Specialist Moderator
Posts: 2196
Joined: Fri Oct 31, 2008 1:00 am
Location.: Germany

Re: DX7 Schematics

Unread post by Miks »

I've used a program named PDF24 to make a pdf out of the schematic - never had any problems by doing so. A double-click and the pdf file gets opened by Adobe Reader DC I have installed...

Edit: Andy, please try again, I've swapped the above pdf file. Let me know if it works for you this time...
My (key related) gear (in alphabetical order):
Ferrofish: B4000+
Kawai: K1 II
Korg: M1 (up'd to EX, w/ 'Cool Blue'), M1REX (w/ 'Cool Blue'), Poly-800
Roland: D-50, D-110, D-550, PG-1000
Yamaha: AW1600, DX7IID (w/ 'Cool Blue'), EX5R, RM50, RX5, SY99 (w/ 'Cool Blue'), TG500,
TX-802, YMM2
Sector101: SYEMB05 (5x), SYEMB06 (3x), EXFLM2 (1kit), MCD Sweet16 (1x), DataBlade32 (1x),
WaveBlade 8MB Card (1x) & 1x Programmer Unit for WaveBlade

User avatar
AndyHornBlower
Member
Member
Posts: 201
Joined: Sat Jun 24, 2017 7:06 am

Re: DX7 Schematics

Unread post by AndyHornBlower »

That one works fine. Thanks, Miks (Y)
Slow the spread of #covid19 Coronavirus : #Masks4All #masks4all

User avatar
Miks
Specialist Moderator
Specialist Moderator
Posts: 2196
Joined: Fri Oct 31, 2008 1:00 am
Location.: Germany

Re: DX7 Schematics

Unread post by Miks »

My pleasure... 8)
My (key related) gear (in alphabetical order):
Ferrofish: B4000+
Kawai: K1 II
Korg: M1 (up'd to EX, w/ 'Cool Blue'), M1REX (w/ 'Cool Blue'), Poly-800
Roland: D-50, D-110, D-550, PG-1000
Yamaha: AW1600, DX7IID (w/ 'Cool Blue'), EX5R, RM50, RX5, SY99 (w/ 'Cool Blue'), TG500,
TX-802, YMM2
Sector101: SYEMB05 (5x), SYEMB06 (3x), EXFLM2 (1kit), MCD Sweet16 (1x), DataBlade32 (1x),
WaveBlade 8MB Card (1x) & 1x Programmer Unit for WaveBlade

Post Reply