I would like to split up the outputs, for example use the left (mono) for piano and the right to use a ventilator for organ sounds. Is this possible?
Thanks,
Kenny
Separating outputs
Moderators: Derek, parametric, Saul
- anotherscott
- Member
- Posts: 245
- Joined: Sun Jan 13, 2013 6:36 pm
Re: Separating outputs
That should work fine, simply by creating Performances where you pan the organ sound to the right (to route it to the Vent) and pan your other sounds to the left. Caveats: Make sure Yamaha's own rotary effect is not part of the organ sound you're sending to the Vent, and you may have to avoid certain effects on your non-organ sounds which would always be stereo, to make sure you don't sound some of a sound out to the Vent even if you have the sound panned he other way.
- pax-eterna
- Member
- Posts: 241
- Joined: Wed Oct 03, 2018 10:25 pm
Re: Separating outputs
just to add to scotts words there, also make sure the Master efx are off, unfortunately you cannot pan them as they are hardwired stereo.I'm preyy sure insert efx are either mono and therefore go with the panning in the part, or can be panned within the effect.