Separating outputs

Covers the Yamaha MODX6, MODX7 and MODX8

Moderators: Derek, parametric, Saul

User avatar United States of America
Kenny1959
Posts: 1
Joined: Mon Jan 14, 2019 9:18 pm

Separating outputs

Unread post by Kenny1959 » Mon Jan 14, 2019 9:22 pm

I would like to split up the outputs, for example use the left (mono) for piano and the right to use a ventilator for organ sounds. Is this possible?

Thanks,

Kenny
United States of America
anotherscott
Member
Member
Posts: 237
Joined: Sun Jan 13, 2013 6:36 pm

Re: Separating outputs

Unread post by anotherscott » Tue Jan 15, 2019 12:53 am

That should work fine, simply by creating Performances where you pan the organ sound to the right (to route it to the Vent) and pan your other sounds to the left. Caveats: Make sure Yamaha's own rotary effect is not part of the organ sound you're sending to the Vent, and you may have to avoid certain effects on your non-organ sounds which would always be stereo, to make sure you don't sound some of a sound out to the Vent even if you have the sound panned he other way.
Australia
pax-eterna
Member
Member
Posts: 241
Joined: Wed Oct 03, 2018 10:25 pm

Re: Separating outputs

Unread post by pax-eterna » Tue Jan 15, 2019 6:03 am

just to add to scotts words there, also make sure the Master efx are off, unfortunately you cannot pan them as they are hardwired stereo.I'm preyy sure insert efx are either mono and therefore go with the panning in the part, or can be panned within the effect.
Post Reply

Return to “Yamaha MODX Forum”