Need help on SYSEX (Edirol UM-550/880).

Anything to do with Midi. Controller Keyboards, Midi gear, software etc.

Moderators: Derek, parametric, Saul

User avatar Belgium
jnm2
Member
Member
Posts: 60
Joined: Tue Aug 21, 2018 9:15 am

Need help on SYSEX (Edirol UM-550/880).

Unread post by jnm2 » Fri Sep 27, 2019 2:17 pm

Hi,

Below is a part of the Edirol UM-550/880 manual.
Yeah, not Yamaha stuff, but on this forum are people which, in my opinion, have better knowledge on sysex then other forums I already visited.

I spend already hours to figure out how the sysex commands should follow up.
The only part that's stilll left now, are those messages between the two --- lines.
There Adres and Data values should become increased, as can made up by all the other sysex commands,
but those between the --- lines are not clear to me. To me this part in the manual is not 100% correct, yet it is an exact copy.

Link to downlaod the manual if still needed (as the tab-spaces are gone when posting this message) :
https://www.roland.com/global/support/b ... s_drivers/

Thanks.


Address(H) Data(H) Parameter Explanation
00 00 00 CURRENT MIDI OUT1 PATCH NO ASSIGN
00 00 01 CURRENT MIDI OUT1 PATCH MIDI IN 1
: : : :
00 00 08 CURRENT MIDI OUT1 PATCH MIDI IN 8
00 00 09 CURRENT MIDI OUT1 PATCH USB IN 1
: : : :
00 00 10 CURRENT MIDI OUT1 PATCH USB IN 8
00 00 11 CURRENT MIDI OUT1 PATCH MERGE
00 01 00 CURRENT MIDI OUT2 PATCH NO ASSIGN
: : : :
00 07 11 CURRENT MIDI OUT8 PATCH MERGE
00 08 00 CURRENT USB 1 MERGE ENABLE MERGE DISABLE
00 08 01 CURRENT USB 1 MERGE ENABLE MERGE ENABLE
00 09 00 CURRENT USB 2 MERGE ENABLE MERGE DISABLE
: : : :
00 0F 01 CURRENT USB 8 MERGE ENABLE MERGE ENABLE
00 10 00 CURRENT MIDI IN 1 MERGE ENABLE MERGE DISABLE
00 10 01 CURRENT MIDI IN 1 MERGE ENABLE MERGE ENABLE
00 11 00 CURRENT MIDI IN 2 MERGE ENABLE MERGE DISABLE
: : : :
00 17 01 CURRENT MIDI IN 8 MERGE ENABLE MERGE ENABLE
---------------------------------------------------------------------
01 00 00 MEMORY 1 MIDI OUT1 PATCH NO ASSIGN
: : : :
01 17 01 MEMORY 1 MIDI IN 8 MERGE ENABLE MERGE ENABLE
02 00 00 MEMORY 2 MIDI OUT1 PATCH NO ASSIGN
: : : :
08 17 01 MEMORY 8 MIDI IN 8 MERGE ENABLE MERGE ENABLE
---------------------------------------------------------------------
09 00 00 SYSTEM MIDI FILTER ENABLE NOTE FILTER DISABLE
09 00 01 SYSTEM MIDI FILTER ENABLE NOTE FILTER ENABLE
09 01 00 SYSTEM MIDI FILTER ENABLE Ax FILTER DISABLE
09 01 01 SYSTEM MIDI FILTER ENABLE Ax FILTER ENABLE
09 02 00 SYSTEM MIDI FILTER ENABLE Bx FILTER DISABLE
09 02 01 SYSTEM MIDI FILTER ENABLE Bx FILTER ENABLE
09 03 00 SYSTEM MIDI FILTER ENABLE Cx FILTER DISABLE
09 03 01 SYSTEM MIDI FILTER ENABLE Cx FILTER ENABLE
09 04 00 SYSTEM MIDI FILTER ENABLE Dx FILTER DISABLE
09 04 01 SYSTEM MIDI FILTER ENABLE Dx FILTER ENABLE
09 05 00 SYSTEM MIDI FILTER ENABLE Ex FILTER DISABLE
09 05 01 SYSTEM MIDI FILTER ENABLE Ex FILTER ENABLE
09 06 00 SYSTEM MIDI FILTER ENABLE SYS REAL/SYS COM FILTER DISABLE
09 06 01 SYSTEM MIDI FILTER ENABLE SYS REAL/SYS COM FILTER ENABLE
09 07 00 SYSTEM MIDI FILTER ENABLE SYS EX FILTER DISABLE
09 07 01 SYSTEM MIDI FILTER ENABLE SYS EX FILTER ENABLE
09 08 00 SYSTEM USB Tx1 ENABLE Tx DISABLE
09 08 01 SYSTEM USB Tx1 DISABLE Tx ENABLE
09 09 00 SYSTEM USB Tx2 ENABLE Tx DISABLE
: : : :
09 0F 01 SYSTEM USB Tx8 DISABLE Tx ENABLE
09 10 00 SYSTEM MIDI CNT PORT NO ASSIGN
09 10 01 SYSTEM MIDI CNT PORT MIDI IN/OUT 1
: : : :
09 10 08 SYSTEM MIDI CNT PORT MIDI IN/OUT 8
09 11 00 SYSTEM USB DRIVER SEL GENERIC
09 11 01 SYSTEM USB DRIVER SEL ORIGINAL
09 12 00 SYSTEM CURRENT RESUME SEL DO NOT RESUME CURRENT
09 12 01 SYSTEM CURRENT RESUME SEL RESUME CURRENT
User avatar
Sonus
Member
Member
Posts: 133
Joined: Tue Aug 05, 2008 12:00 am

Re: Need help on SYSEX (Edirol UM-550/880).

Unread post by Sonus » Sat Sep 28, 2019 6:30 am

Just copy all CURRENT parameters to the MEMORY locations:

01 00 00 MEMORY 1 MIDI OUT1 PATCH - NO ASSIGN
: : : :
01 17 01 MEMORY 1 MIDI IN 8 MERGE ENABLE - MERGE ENABLE
02 00 00 MEMORY 2 MIDI OUT1 PATCH - NO ASSIGN
: : : :
02 17 01 MEMORY 2 MIDI IN 8 MERGE ENABLE - MERGE ENABLE
03 00 00 MEMORY 3 MIDI OUT1 PATCH - NO ASSIGN
: : : :
03 17 01 MEMORY 3 MIDI IN 8 MERGE ENABLE - MERGE ENABLE
04 00 00 MEMORY 4 MIDI OUT1 PATCH - NO ASSIGN
: : : :
04 17 01 MEMORY 4 MIDI IN 8 MERGE ENABLE - MERGE ENABLE
05 00 00 MEMORY 5 MIDI OUT1 PATCH - NO ASSIGN
: : : :
05 17 01 MEMORY 5 MIDI IN 8 MERGE ENABLE - MERGE ENABLE
06 00 00 MEMORY 6 MIDI OUT1 PATCH - NO ASSIGN
: : : :
06 17 01 MEMORY 6 MIDI IN 8 MERGE ENABLE - MERGE ENABLE
07 00 00 MEMORY 7 MIDI OUT1 PATCH - NO ASSIGN
: : : :
07 17 01 MEMORY 7 MIDI IN 8 MERGE ENABLE - MERGE ENABLE
08 00 00 MEMORY 8 MIDI OUT1 PATCH - NO ASSIGN
: : : :
08 17 01 MEMORY 8 MIDI IN 8 MERGE ENABLE - MERGE ENABLE
User avatar Belgium
jnm2
Member
Member
Posts: 60
Joined: Tue Aug 21, 2018 9:15 am

Re: Need help on SYSEX (Edirol UM-550/880).

Unread post by jnm2 » Sat Sep 28, 2019 9:17 am

Sonus that seems to be the thing. Thanks.

Such midi-data is always a job to figure out. As if they are ment to let you start puzzling crazy.
Understanding the meaning of each commandserie wil be the next thing to find out. Often try and error...
At least the um-550 shows a blinking LED if the sysex is wrong, very helpfull. :)

P.s. one more thing the um-550 hardware let you save only 5 setups maximum.
Maybe with these sysexcommands 8 memories can be reach (like the um-880) ?
I'm curious for the result of that.
Post Reply

Return to “MIDI and Controller Keyboards”