AN200 Internal Software Update v1.03

Forum for fans of the wonderful Yamaha AN1x Analog Physical Modeling Synthesizer, AN200 desktop module and PLG150AN.

Moderators: Derek, parametric, Saul

User avatar
stephen
Posts: 1
Joined: Sun Nov 04, 2018 7:43 pm
Great Britain

AN200 Internal Software Update v1.03

Unread post by stephen » Sun Nov 04, 2018 7:59 pm

Recently found a cd with an internal software update for the AN200 i'd downloaded but never installed.
It's a twelve minute sys-ex midi file. Will this cure the dreaded looping "bug" of the internal step sequencer and song mode?

Thanks...
User avatar
jnm2
Member
Member
Posts: 22
Joined: Tue Aug 21, 2018 9:15 am
Belgium

Re: AN200 Internal Software Update v1.03

Unread post by jnm2 » Mon Nov 05, 2018 12:09 pm

stephen wrote:
Sun Nov 04, 2018 7:59 pm
It's a twelve minute sys-ex midi file.
What is that ?
User avatar
Miks
Specialist Moderator
Specialist Moderator
Posts: 1702
Joined: Fri Oct 31, 2008 1:00 am
Germany

Re: AN200 Internal Software Update v1.03

Unread post by Miks » Mon Nov 05, 2018 2:42 pm

I think this sysex file 'takes' around twelve minutes to perform the complete upgrade to v1.03... 8)
My (key related) gear (in alphabetical order):
Ferrofish: B4000+
Kawai: K1 II
Korg: M1 (up'd to EX, w/ 'Cool Blue'), M1REX (w/ 'Cool Blue'), Poly-800
Roland: D-50, D-110, D-550, PG-1000
Yamaha: AW1600, DX7IID (w/ 'Cool Blue'), EX5R, RM50, RX5, SY99 (w/ 'Cool Blue'), TG500, TX-802, YMM2
Sector101: SYEMB05 (5x), SYEMB06 (3x), EXFLM2 (1kit), MCD Sweet16 (1x), WaveBlade 8MB Card (1x) & 1x Programmer Unit for WaveBlade
User avatar
jnm2
Member
Member
Posts: 22
Joined: Tue Aug 21, 2018 9:15 am
Belgium

Re: AN200 Internal Software Update v1.03

Unread post by jnm2 » Mon Nov 05, 2018 4:52 pm

That seems a very long time for an upgrade...
User avatar
Miks
Specialist Moderator
Specialist Moderator
Posts: 1702
Joined: Fri Oct 31, 2008 1:00 am
Germany

Re: AN200 Internal Software Update v1.03

Unread post by Miks » Mon Nov 05, 2018 5:31 pm

Well - my Ferrofish B4000+ took about 5 minutes to complete the upgrade procedure via USB... and the B4000+ is much newer than an AN200... 8O
My (key related) gear (in alphabetical order):
Ferrofish: B4000+
Kawai: K1 II
Korg: M1 (up'd to EX, w/ 'Cool Blue'), M1REX (w/ 'Cool Blue'), Poly-800
Roland: D-50, D-110, D-550, PG-1000
Yamaha: AW1600, DX7IID (w/ 'Cool Blue'), EX5R, RM50, RX5, SY99 (w/ 'Cool Blue'), TG500, TX-802, YMM2
Sector101: SYEMB05 (5x), SYEMB06 (3x), EXFLM2 (1kit), MCD Sweet16 (1x), WaveBlade 8MB Card (1x) & 1x Programmer Unit for WaveBlade
Post Reply

Return to “Yamaha AN1X, AN200 & PLG150AN”