JimEPage wrote: ↑
Thu Jul 11, 2019 6:31 pm
New here and just starting playing around with a THR10.
My question is, what is the difference between YDL and YDP? I can activate YDl for the THR10 but NOT YDP.
Am I correct in that YDL is ONLY for the THR10, and YDP is for the other models?(THR10C, THR10X, etc)
I have been to web pages where there are presets specifically submitted for the THR10, but they are in YDP.
So I'm a little confused.
Does anyone have a definitive answer on this?
Thanks in advance for the help!
Hi Jim, welcome to the forum and the string section.
YDL is a whole library containing up to 100 patches.
YDP is one single patch that can be loaded, and if you wish, added to your library or one of the 5 user memory knobs.
YDL and YDP files made for THR-10 will only work on another THR-10
(they work on THR-5 as well, but not any other models.)
YDL and YDP files made for THR-10C will only work on another THR-10C
YDL and YDP files made for THR-10X will only work on another THR-10X
I assume that this goes for the THR-5A (the acoustic amp) as well, but I haven't testet one yet.
Try and see if you can load a single YDP patch, then save it to one of the 5 user memories,
and even to the (YDL) library that you're already running.
in our THR patch and library download section, the different files are divided into sections for each model.
for YDP patches for your THR-10 model start here: viewtopic.php?f=135&t=9613#p56099
for YDL libraries for your THR-10 model start here: viewtopic.php?f=135&t=9613#p56101