yet another display replacement (i.e power supply for +5volt)

Yamaha SY77 is a 16 voice multitimbral music workstation first produced by Yamaha Corporation in 1989. The SY77 is a synthesizer whose architecture combines AFM (Advanced Frequency Modulation) synthesis, AWM2 (Advanced Wave Memory 2) for ROM-borne sample-based synthesis, and the combination of these two methods christened Realtime Convolution and Modulation Synthesis (RCM).

Moderators: parametric, Derek, Saul

ledan
Member
Member
Posts: 90
Joined: Sat Jan 21, 2012 8:41 pm
Contact:
Sweden

yet another display replacement (i.e power supply for +5volt)

Unread post by ledan » Thu Aug 09, 2018 7:35 pm

Hi,

Planning to take the leap this weekend for my TG77 (as i did for my Sy77 eons ago, but where i can't remember the steps anymore :cry: )

Im i right to assume that i will take away the 2-pin power connector from the CN506 (from the inverter board. Or rather desolder it) and instead solder it onto the CN605 position to get the +5 volt needed for the BuyDisplay lcd?

(plus all the other things needed such as adding a VR for the backlight, etc as mentioned in the guides)

br

Dan
User avatar
Derek
Global Moderator
Global Moderator
Posts: 3982
Joined: Fri Dec 07, 2007 1:00 am
Contact:
Wales

Re: yet another display replacement (i.e power supply for +5volt)

Unread post by Derek » Fri Aug 10, 2018 5:17 pm

Hi,

Details of what I did to my TGG, and where picked up the power, can be found here. I have no time right now to check the detail, but hopefully that will help you.

http://www.xfactory-librarians.co.uk/guides.html

Good luck!
Regards
Derek Cook

http://www.carregddu.co.uk
http://www.echoes-music.co.uk
http://www.xfactory-librarians.co.uk
http://www.ex5tech.co.uk
Post Reply

Return to “Yamaha SY77 Forum - Covers the Sy77 Keyboard and TG77 Module”