Revstar 502T Bridge Pup Volume Drop

This section is dedicated to players of electric guitar. From beginner to expert and all in between. Everyone is welcome here.

Moderators: Derek, parametric, Buzzard, Saul

User avatar Australia
Andy54
Posts: 1
Joined: Mon Aug 05, 2019 1:48 am

Revstar 502T Bridge Pup Volume Drop

Unread post by Andy54 » Mon Aug 05, 2019 2:05 am

I was wondering if any other owners of this guitar have found that when the bridge pup is selected [ ie just bridge pup ] there is a drop in volume.

I bought this guitar new so there's been no change of height from factory specs.

Cheers
Andy
Advertisement
Ultimate Vocal Library
User avatar Denmark
Buzzard
Specialist Moderator
Specialist Moderator
Posts: 2687
Joined: Wed Sep 04, 2013 7:38 pm
Contact:

Re: Revstar 502T Bridge Pup Volume Drop

Unread post by Buzzard » Mon Aug 05, 2019 5:09 pm

Andy54 wrote:
Mon Aug 05, 2019 2:05 am
I was wondering if any other owners of this guitar have found that when the bridge pup is selected [ ie just bridge pup ] there is a drop in volume.

I bought this guitar new so there's been no change of height from factory specs.

Cheers
Andy
Hi Andy, welcome to the forum and the string section. :D

Even though your guitar has the factory settings. the bridge pup may be a little too low after all.
Hopefully some of our members owning a Revstar 502-T will jump in an share their experience.

Best Regards
Peter
Yamaholic, Guitars, Amps and Bikes. :idea: My Guitars: http://www.yamahamusicians.com/forum/vi ... =24&t=7004 :idea:
User avatar United States of America
NYGeorge
Member
Member
Posts: 354
Joined: Tue Jun 03, 2014 8:26 pm

Re: Revstar 502T Bridge Pup Volume Drop

Unread post by NYGeorge » Thu Aug 15, 2019 2:08 am

Andy
I saw this thread a while back but just finally got a chance to check my 502 tonite. There does not seem to be a volume drop when going to the bridge pup except maybe a tiny bit if the tone is rolled off.
Post Reply

Return to “Electric Guitar, Amps & Effects”