Question about Pacifica 120H

This section is dedicated to players of electric guitar. From beginner to expert and all in between. Everyone is welcome here.

Moderators: Derek, parametric, Buzzard, Saul

User avatar Canada
mwcd
Posts: 8
Joined: Mon Sep 16, 2019 8:13 pm

Question about Pacifica 120H

Unread post by mwcd » Mon Oct 07, 2019 4:35 pm

Hi all,

I have another question regarding these pacifica models which can show up on local classifieds.

1) Dating: There is a particular 120H with serial number with format letter-letter-#####-letter. As per a guide that I saw on the internet, this would indicate that the guitar was crafted in a year ending with 1. I am guessing it is either 2001 or 2011 and that it was made in Taiwan, but was wondering if anyone else can confirm.

2) Damages: Also, the guitar appears to have some cosmetic challenges (nothing that should impair its sonic characteristics). The interesting thing though is it appears the top layer varnish has been scruffed off, and while I would except the sub-varnish layer to be wood colour, it is grey. What could this be? The guitar is supposedly made of alder (maybe not solid alder) and is in natural finish.

Any assistance on this would help and thank you. Otherwise, with the coil tap, this seems like a nice model.
User avatar Denmark
Buzzard
Specialist Moderator
Specialist Moderator
Posts: 2629
Joined: Wed Sep 04, 2013 7:38 pm
Contact:

Re: Question about Pacifica 120H

Unread post by Buzzard » Mon Oct 07, 2019 5:39 pm

Using the guitardaterproject.org you should get results.

https://www.guitardaterproject.org/Yamaha.aspx

Mine has this number: HHN253269
and the result goes like this:

Your guitar was made in
Taiwan
on July 25th, 2011
Production Number: 3269
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

:idea: Link to Yamaha Pacifica guitars: http://www.yamahapacifica.com/ :idea:

Yamaha PAC-120H TBS

This model has COIL SPLIT. (pull-push switch on the tone control)

Image Image

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

To evaluate damage on the finish, you gotta give us some pictures to work with.

Regards
Peter
Yamaholic, Guitars, Amps and Bikes. :idea: My Guitars: http://www.yamahamusicians.com/forum/vi ... =24&t=7004 :idea:
User avatar Canada
mwcd
Posts: 8
Joined: Mon Sep 16, 2019 8:13 pm

Re: Question about Pacifica 120H

Unread post by mwcd » Wed Oct 09, 2019 1:16 am

I actually have a lot of difficulty reading the serial number from the picture. I will post a picture of body and headstock. If you can figure it out let me know :D

Image
Attachments
$_60.JPG
I believe the serial number starts with HJ
$_60.JPG (79.69 KiB) Viewed 289 times
$_59.JPG
The body marks are a bit difficult to see but it looks like the natural finish has been scruffed off superficially and that there is a gray layer underneath.
$_59.JPG (76.8 KiB) Viewed 289 times
User avatar Great Britain
parametric
Global Moderator
Global Moderator
Posts: 3865
Joined: Mon Jan 18, 2010 1:00 am
Contact:

Re: Question about Pacifica 120H

Unread post by parametric » Wed Oct 09, 2019 1:22 am

Looks like HJ1083128 to me . . . .

The Last digit looks more like the "8" than a zero (IMO)

parametric
Alesis Fusion 8SSD AND 6SSD - BOTH are 384Mb/120Gb SSD/Akai ADVANCE61/Yamaha MOXF6/1024Mb Flash Ram/Yamaha SY85/8.5mb vol/1024k non-vol/DX21/Roland MT32/Bachmann double overstrung Baby Grand Piano/Win10 Pro/Ubuntu MATE 15.0.4/iBook G4/Mac OS 10.4.6/ProTools 7.4/MBox2/M-Audio MicroTrack 24/96

NI Komplete11 Ultimate

Sector101 2x SYEMB06 / 4 x EXM-E3 128MB DRAM Module

BRAND NEW DSDD (720k) FLOPPY DISKS FOR SALE - http://www.yamahaforums.co.uk/forum/vie ... =22&t=9217

Watch out now! take care, BEWARE of the greedy leaders! They'll take you where you should not go - (George Harrison)

IT'S TRUE - "MONEY TALKS" - TO ME, IT MOSTLY SAYS "GOODBYE" ;-)
http://www.chrisnmiller.co.uk/Chris
User avatar Denmark
Buzzard
Specialist Moderator
Specialist Moderator
Posts: 2629
Joined: Wed Sep 04, 2013 7:38 pm
Contact:

Re: Question about Pacifica 120H

Unread post by Buzzard » Wed Oct 09, 2019 10:51 am

Let's assume that the number is: HJI083128 , it's a bit difficult to see in the picture. :?

That will give this result:

Your guitar was made in
Taiwan
on February 8th, 2013
Production Number: 3128

Regards
Peter
Yamaholic, Guitars, Amps and Bikes. :idea: My Guitars: http://www.yamahamusicians.com/forum/vi ... =24&t=7004 :idea:
User avatar Canada
mwcd
Posts: 8
Joined: Mon Sep 16, 2019 8:13 pm

Re: Question about Pacifica 120H

Unread post by mwcd » Thu Oct 10, 2019 3:42 am

That's helpful and seems more likely than 2001 as the 120H model I believe is from the 2010s.

What do you think of the colour of the damages?

Also, a general question about the pacifica's with split coils. Are the split coils thought to give a similar quality sound as a stand-alone single coil pickup or is there any compromise there?
User avatar Denmark
Buzzard
Specialist Moderator
Specialist Moderator
Posts: 2629
Joined: Wed Sep 04, 2013 7:38 pm
Contact:

Re: Question about Pacifica 120H

Unread post by Buzzard » Thu Oct 10, 2019 6:18 am

mwcd wrote:
Thu Oct 10, 2019 3:42 am
What do you think of the colour of the damages?
I don't know.
IF your guitar has a thin veneer worn through, it might be the color of the glue …. BUT
Yamaha usually use solid wood for electric guitar bodies, and if yours is one, CLEAN IT, it's probably just dirt. :dance:
mwcd wrote:
Thu Oct 10, 2019 3:42 am
Also, a general question about the pacifica's with split coils. Are the split coils thought to give a similar quality sound as a stand-alone single coil pickup or is there any compromise there?
a SPLIT humbucker is a single coil pickup, but magnets are not quite the same as an ordinary single coil pickup.

Regards
Peter
Yamaholic, Guitars, Amps and Bikes. :idea: My Guitars: http://www.yamahamusicians.com/forum/vi ... =24&t=7004 :idea:
User avatar Denmark
Buzzard
Specialist Moderator
Specialist Moderator
Posts: 2629
Joined: Wed Sep 04, 2013 7:38 pm
Contact:

Re: Question about Pacifica 120H

Unread post by Buzzard » Thu Oct 10, 2019 6:28 am

Info on COIL SPLIT and COIL TAP : viewtopic.php?f=24&t=11053
Yamaholic, Guitars, Amps and Bikes. :idea: My Guitars: http://www.yamahamusicians.com/forum/vi ... =24&t=7004 :idea:
User avatar Canada
mwcd
Posts: 8
Joined: Mon Sep 16, 2019 8:13 pm

Re: Question about Pacifica 120H

Unread post by mwcd » Sat Oct 12, 2019 11:13 pm

Thanks for the info, so many models to choose from! In the classifieds, 120h (200$), 311h (300$), 112 (200$), and even a 612hfm limited edition (575$) have arisen. This is in Canadian funds. I've been thinking that the 300 series has nice upgrades but maybe it is not enough to justify the $100 price difference. Any thoughts?
User avatar Great Britain
balston11
Senior Member
Senior Member
Posts: 816
Joined: Mon Jul 14, 2014 8:03 pm
Contact:

Re: Question about Pacifica 120H

Unread post by balston11 » Sun Oct 13, 2019 10:11 am

You can find a fair amount of info on the Pacificas on my web site the relevant section starts here
http://www.alston-family.co.uk/pac/pacintro.php
Bill
Web http://www.alston-family.co.uk for lots of Yamaha and other guitar information
User avatar Canada
mwcd
Posts: 8
Joined: Mon Sep 16, 2019 8:13 pm

Re: Question about Pacifica 120H

Unread post by mwcd » Fri Oct 18, 2019 3:03 am

Is there any known difference between the alder body used between the 100 series and 300 series these days? Is it known that one uses more pieces or laminates than the other?
User avatar Denmark
Buzzard
Specialist Moderator
Specialist Moderator
Posts: 2629
Joined: Wed Sep 04, 2013 7:38 pm
Contact:

Re: Question about Pacifica 120H

Unread post by Buzzard » Sat Oct 19, 2019 9:16 pm

mwcd wrote:
Fri Oct 18, 2019 3:03 am
Is there any known difference between the alder body used between the 100 series and 300 series these days? Is it known that one uses more pieces or laminates than the other?
I doubt there is much if any difference in the woods from the 100 series to the 300 series.
The main upgrade is in the hardware.

Regards
Peter
Yamaholic, Guitars, Amps and Bikes. :idea: My Guitars: http://www.yamahamusicians.com/forum/vi ... =24&t=7004 :idea:
Post Reply

Return to “Electric Guitar, Amps & Effects”