Elements not sounding

Covers the Yamaha MODX6, MODX7 and MODX8

Moderators: Derek, parametric, Saul

keys123
Member
Member
Posts: 34
Joined: Mon Dec 10, 2018 4:39 pm

Elements not sounding

Unread post by keys123 »

Hi

I have a part in which only the 1st three elements produce sound.
Elements 5 through 8 produce no sound.
Elements 5 through 8 are turned on. All parameters look right.

Any ideas why some elements won't sound?

User avatar
martyjones6294
Member
Member
Posts: 57
Joined: Thu Nov 22, 2018 5:21 pm

Re: Elements not sounding

Unread post by martyjones6294 »

Three things that I would check:

1. check the key range

2. check the velocity range

3. make sure that keyboard control is turned on

keys123
Member
Member
Posts: 34
Joined: Mon Dec 10, 2018 4:39 pm

Re: Elements not sounding

Unread post by keys123 »

Thanks for responding.

All those requirements you mentioned are met.

I think I check the obvious parameters.
I must be missing somethings.

Still no sound.

User avatar
dfinucci
Member
Member
Posts: 83
Joined: Wed Feb 27, 2008 1:00 am

Re: Elements not sounding

Unread post by dfinucci »

Hello.
Could they be activated by some Assignable switch ?
This is the case, I.E., of brass shacking sound in DYN BRASS...
Sincerely
D

keys123
Member
Member
Posts: 34
Joined: Mon Dec 10, 2018 4:39 pm

Re: Elements not sounding

Unread post by keys123 »

Thanks for responding.

No Assignments.
Still no sound

I recreated it from scratch from a factory Init.
All the elements sound in the new Performance.

Maybe I'll figure it someday.

Post Reply