FG 800 String change fret buzz

For over 40 years, the FG series has continued to offer outstanding quality and tone on affordable instruments. These player favorites have played countless gigs, written thousands of songs and are heard by millions of people year after year.

Moderators: Buzzard, Derek, parametric, Saul

User avatar
thaynes
Posts: 1
Joined: Fri May 22, 2020 4:50 pm
Location.: California, USA

FG 800 String change fret buzz

Unread post by thaynes »

Hi!

I am new to the forum and have been playing for only a couple of years.

I changed the strings on my FG 800 for the first time. I used Elixir phosphor/bronze nanoweb light.

Now, I notice that there is a slight fret buzz on the high E string. I tried adjusting the neck relief, but that did not help. These strings are the same size as the stock strings.

I am wondering if anyone has had this experience or what else I should try.


thanks,

Tom.

User avatar
Saul
Site Admin
Site Admin
Posts: 12743
Joined: Sun Feb 01, 2004 1:00 am
Location.: UK, West Sussex
Contact:

Re: FG 800 String change fret buzz

Unread post by Saul »

Hi Tom, welcome to the forums :)

I know you said the Elixir's are the same size as the stock strings but can you let me know exactly what they are?
Saul
Site Admin
#masks4all

Subscribe To Our YouTube Channel!
Review Yamahamusicians.com on Trustpilot
Sign up to the Newsletter
Follow us on Twitter @YamahaMusicians
Follow Us On Facebook
Follow Us On Tumblr
Dowina Acoustic Guitars: Dowina Cabernet DC
Dowina Chardonnay GAC DS - Dowina Rustica GAC - Dowina Marus - Dowina Puella

Please Note: This site is supported by Amazon Associate advertising links. Any links in my posts may lead to products on the Amazon website. These will not incur any extra cost to you but may help me via the generation of a small commission should you choose to purchase a product.

User avatar
shelly0624
Global Moderator
Global Moderator
Posts: 406
Joined: Sun Jul 14, 2019 4:13 am
Location.: United Sates

Re: FG 800 String change fret buzz

Unread post by shelly0624 »

Welcome thaynes :)

I'm wondering about the strings. If they were a higher density (not so stretchy) and a slightly thicker gauge, would there be less fret buzz and the vibration arc would be less?. Also the grooves in the guitar nut are super important. So those are the two things I wonder about (besides adjusting the truss rod, which you've already done).. if the strings (one or two of them) cause a bigger vibration arc, maybe a heavier gauge would help.. or maybe it might be a faulty nut. Sometimes the grooves in the nut can wear and become deeper and even a little wider, but it sounds like you haven't been playing that long. Was your guitar a newer model? Just a couple of ideas. I actually could get my guitar serviced for $50 at Guitar Center. They would adjust the action .. give it a new bridge.. new strings..a few things. (I hated the strings they put on mine and replaced them with my favorite brand). I don't know if all stores offer that (or if it is the same price). I set the action on my guitar really low, so it was ALMOST at the point where it could have fret buzz, but wasn't. I used Martin Marquis strings, silk and steel, light gauge. (Can't play anymore. My hands are shot).

Post Reply